Does this metal roof price include tear-off?

No. Removal is a separate set of rows in the same cost file, and this page reads none of them. Ask for the old roof's removal as its own line on the estimate.

Which metal roof does this range cover?

Standing seam only. The file carries a second metal row for an exposed-fastener panel, and this page leaves it out so the range describes one product.

Is the metal roof rate the same for every house?

No. The rate is per roofing square, so the figure moves with the roof area a bidder measures, the panel chosen and the trim the roof needs.

How old is this metal roof range?

It was gathered August 25, 2026. The file behind it is refreshed at least twice a year, and each source page is linked above.

Metal roof cost in San Antonio | Best Roofers Ranked

Metal roof cost in San Antonio

Best Roofers Ranked puts standing seam metal at $1,000 to $1,600 per roofing square installed in San Antonio, from 4 published local price pages read August 25, 2026. Each page behind the range is named in the table below.

This page prices one metal system, standing seam, from one stored row of the San Antonio cost file, and it names every row it leaves out.

Built from this site's own records, newest read November 1, 2026.

The stored standing seam range

Standing seam metal runs $1,000 to $1,600 per roofing square installed in San Antonio. That is the stored standing seam row in the San Antonio cost file, built from 4 published price pages read August 25, 2026 and named below by source id (S9, S10, S12, S15).

The rate covers the metal system installed, panel and seams and underlayment and trim, measured per roofing square of roof surface. It is not a price per panel, and it is not a job total: the square count comes from the roof a bidder measures.

Source id	Publisher	What that page states	Read
S9	Wannamaker Roofing	Standing seam metal, exposed-fastener metal, concrete tile and clay tile rates, derived per square from a stated 22-square reference home	November 1, 2026
S10	Dolan Roofing & Construction	Standing seam metal rate	at the gather date
S12	Affordable Roofing Contractors San Antonio	Standing seam metal rate	October 19, 2026
S15	Bison Roofing	Standing seam metal rate	at the gather date

What this page leaves out

The San Antonio cost file holds 5 material rows. This page reads the standing seam row and none of the others: architectural asphalt shingle, 3-tab asphalt shingle, exposed-fastener metal panel and concrete or clay tile. It reads no removal row either (none, new construction, one layer and two layers), and no permit allowance row. Each of those lives in the same file, and none of their figures is printed here.

The exposed-fastener metal panel row is the nearest neighbour in the file. It describes a different system, fixed through the sheet rather than seamed shut, so the two are kept apart rather than blended into a metal range that would fit neither.

Standing seam against an exposed-fastener panel

A standing seam roof holds its panels with concealed clips and folds the seams shut, so no fastener passes through the face of the panel. An exposed-fastener panel is screwed through the sheet, with the washers visible on the roof.

The two systems differ in how water is kept out and in how the roof is repaired, which is why a quote that does not name the system cannot be checked against either row in the file.

Ask which product a bid prices before comparing its number with the range above.

What to ask a metal bidder

A metal quote is comparable when it answers the same questions as the row above.

Which system is being priced, standing seam or exposed fastener?
What panel gauge and finish does the quote name?
How many roofing squares did the bidder measure, and does the contract show that number?
Is removal of the old roof a separate line, and is it included at all?
Does the scope cover ridge, hip and valley trim, and the flashing where the roof meets a wall?
Whose warranty applies, the installer's or the panel maker's, and how long does each run?

How old this rate is

The standing seam range was gathered August 25, 2026, and the San Antonio cost file is refreshed at least twice a year. Where a source page in the table carries its own read day, that is the day the file records for it.

Frequently Asked Questions

Metal roof cost in San Antonio: Standing seam metal runs $1,000 to $1,600 per roofing square installed in San Antonio, from 4 published local price pages read August 25, 2026. The source ids behind the range are S9, S10, S12, S15.
Does this metal roof price include tear-off?: No. Removal is a separate set of rows in the same cost file, and this page reads none of them. Ask for the old roof's removal as its own line on the estimate.
Which metal roof does this range cover?: Standing seam only. The file carries a second metal row for an exposed-fastener panel, and this page leaves it out so the range describes one product.
Is the metal roof rate the same for every house?: No. The rate is per roofing square, so the figure moves with the roof area a bidder measures, the panel chosen and the trim the roof needs.
How old is this metal roof range?: It was gathered August 25, 2026. The file behind it is refreshed at least twice a year, and each source page is linked above.

Where these figures come from

S9, Wannamaker Roofing, published price page. https://www.wannamakerroofing.com/roof-replacement-cost-san-antonio/. Read November 1, 2026.
S10, Dolan Roofing & Construction, published price page. https://www.dolanroofing.com/standing-seam-metal-roof-cost/.
S12, Affordable Roofing Contractors San Antonio, published price page. https://affordableroofingcontractorssanantonio.com/blogs/metal-roof-cost-1500-sq-ft-house/. Read October 19, 2026.
S15, Bison Roofing, published price page. https://bisonroofing.net/metal-roofing-costs-san-antonio/.

Check The Contractor Beyond The Public Record

The Texas Department of Licensing and Regulation does not administer licensure for roofing contractors. The Roofing Contractors Association of Texas says anyone can call themselves a roofer in Texas, and describes its own license as voluntary self-regulation. Roofing Contractors Association of Texas, Licensing, read October 10, 2026.

The Texas Department of Insurance advises getting at least three bids, written on company letterhead with a phone number and an address. Texas Department of Insurance, Contractor scams, read October 10, 2026.