Built from this site's own records, newest read November 1, 2026.
The stored one-layer range
One layer of roof tear-off in San Antonio runs $100 to $300 per roofing square. The range is the stored San Antonio row behind this page, taken from 4 published local price pages read August 25, 2026 and named below by source id (S6, S14, S25, S29).
The row is a rate per square, not a job total. Removal scales with the roof's surface area, so the same rate gives a smaller figure on a small roof and a larger one on a big roof, and the square count is the part a bidder has to measure.
| Source id | Publisher | What that page states | Read |
|---|---|---|---|
| S6 | Ripple Roofing & Construction | One-layer tear-off rate. Also the basis for the two-layer tear-off assumption | November 1, 2026 |
| S14 | Affordable Roofing Contractors San Antonio | One-layer tear-off rate | October 19, 2026 |
| S25 | Apex Roofing & General Contractors | One-layer tear-off rate, and confirms San Antonio code caps a re-roof at two layers | November 1, 2026 |
| S29 | Bondoc Roofing | One-layer tear-off rate | November 1, 2026 |
What this page does not read
The San Antonio cost file holds more rows than this page reads. It holds 5 material rows (architectural asphalt shingle, 3-tab asphalt shingle, standing seam metal, exposed-fastener metal panel and concrete or clay tile), 2 other removal rows (none, new construction and two layers), and a permit allowance row. None of their figures is printed here, and the page does not combine them with the tear-off rate.
The two-layer row is an assumption rather than a sourced San Antonio rate. No local source prices a second layer on its own, so the file sets that row as the one-layer rate applied twice and says so in its own note. This page prints the sourced one-layer range and stops there.
The permit allowance row is a fixed city fee for a re-roof permit, not a removal rate, so it belongs to the permit pages and not to this range.
What moves a tear-off rate
Removal is priced on roof area and on what is coming off. A second layer means more material to strip and more to dispose of, tile or metal removal is heavier work than stripping shingles, and access changes the labour: a steep roof, a tight lot or a finished ceiling under the deck all slow a crew down.
None of that changes the stored range, which prices one layer of removal per square. It does explain why two bids for the same house can land at different points inside it.
A bid should carry the removal as its own line, with the layer count and the rate per square, so it can be read against the range above. A bid that folds removal into the material price leaves nothing to check.
What to ask before signing
Four questions make a tear-off line comparable to another one.
- How many layers are being removed, and does the bid say so in writing?
- What is the rate per square for the removal, and what is the square count it is multiplied by?
- Is disposal of the old material inside that line, or is it billed separately?
- Is the decking inspected after removal, and how is a damaged sheet priced if one turns up?
How old this range is
The range was gathered August 25, 2026, and the San Antonio cost file is refreshed at least twice a year. Each source page in the table above carries the day it was read where the file stores one, and the gather date covers the rows that carry no separate read day.
Related pages
- Roof tear-off cost in San Antonio: what the public files show
- Roof replacement cost in San Antonio
- Roof replacement cost per square in San Antonio
- Metal roof cost per square in San Antonio
- Metal roof cost in San Antonio
- Roof replacement cost calculator
More questions homeowners ask in San Antonio
Frequently Asked Questions
- How much does roof tear-off cost in San Antonio?
- One layer of roof tear-off in San Antonio runs $100 to $300 per roofing square, from 4 published local price pages read August 25, 2026. The source ids behind the range are S6, S14, S25, S29.
- Is the two-layer tear-off price sourced?
- No. The San Antonio cost file stores the two-layer row as an assumption, the one-layer rate applied twice, because no local source prices a second layer separately. Treat it as a guide to ask about, not as a market rate.
- Is tear-off included in a roof replacement quote?
- The bid itself answers that. Ask for the removal as its own line with the layer count and the per-square rate, so it can be compared with the range above instead of disappearing into a material price.
- How old is this tear-off range?
- It was gathered August 25, 2026, and the file behind it is refreshed at least twice a year. The source pages listed above are the ones the range was read from.
Where these figures come from
- S6, Ripple Roofing & Construction, published price page. https://rippleroofs.com/blog/roof-replacement-cost-san-antonio. Read November 1, 2026.
- S14, Affordable Roofing Contractors San Antonio, published price page. https://affordableroofingcontractorssanantonio.com/blogs/metal-roof-cost-1500-sq-ft-house/. Read October 19, 2026.
- S25, Apex Roofing & General Contractors, published price page. https://apexroofing.biz/blog/how-much-to-raise-the-roof-in-san-antonio-without-breaking-the-bank/. Read November 1, 2026.
- S29, Bondoc Roofing, published price page. https://bondocroofing.com/how-much-does-it-cost-to-tear-off-and-replace-a-roof-in-san-antonio-tx/. Read November 1, 2026.